You will have to bring the graphic on the awning face down and the graphic on the valance up until they meet at the exact right place. Now, when you apply a graphic or text, it will naturally flow over both the front fabric and the sign band, unless you checked the "Separate SB fabric" box.ġ) Apply the same graphic to the front panel and then to the valance.Ģ) Make the two graphics the same width by typing in the width in the dimensions textbox for each graphic.ģ) Line up the two graphics so that they meet at the seam between the front face and the valance. To do this, go to the Object tab in the lower left, Parameters, Sign Band, and check the box next to "SB height". If it's a straight valance, the easiest way is to add a sign band instead of using "Apply Valance". How do I apply a graphic so that it overlaps both the front face and the valance of an awning? (The “Actual” column is for reference only and displays the actual value in use, which may differ from the specified value – for example when no value is specified.) Any of these measurements can be changed by typing a new value into the “Specified” column.
A list of valance measurements will be displayed. Then go to the Valance tab in the lower left. Find the part called “Valance” and click on it. After the valance has been applied, look at the Object Parts list in the upper left. Each of these valance styles can be adjusted in various ways. Stripes can be aligned with the cutouts using the Horizontal Offset slider in the Texture tab in the lower left.Īwning Composer includes over 25 pre-defined valance styles. Note that for striped fabrics, the number of valance cutouts will be determined by the fabric repeat.
When you've decided on the style to use, double-click on the valance to apply it and close the list. You can click on several styles to quickly try different ones. (You should see the X, Y, and Z axis lines running through the center of it.) Then click on the Apply Valance button. Try the Emissive slider and the controls in the Color Controls section. If adjusting the lighting direction and lighting levels does not yield the desired result, you can fine-tune the lighting and color in the Material tab in the lower left. The darker colors in version 5 have been adjusted to compensate for this problem and should work better than in version 4. This makes it harder to see variations in brightness across the surface of the object. How do I make dark colored awnings look more realistic?ĭark colored materials such as navy blue and black fabric can be difficult to work with because they reflect only a small amount of light. This slider adjusts the intensity of the light that reflects off the object directly towards the viewer. The Specular Light slider in the Light tab works on objects that are shiny like frame components or poles. You can also use the Ambient Light slider in the Light tab to adjust the amount of background light in the scene. You can do this with the Rotate Light button or the Time slider in the Sky tab. You can adjust the shading by changing the direction of the light to get the most realistic looking shading. What makes an awning look realistic is varying levels of shading across its various parts. How do I make awnings look more realistic?
0 kommentar(er)
